Super Systems DAQ - Manual (Page 5)

Super Systems Inc. Page 5 of 34 DAQ Operations Manual
Page 3 will allow the user to select the
location of the installation. The default
location is “C:\SSi\”. To change this
location, click on the Browse button and
select a new location from the dialog box
that is displayed. The Disk Usage button
is a utility that will display the available
hard drive space on the local computer.
Click on the Next > button to move to the
next page.
Page 4 will allow the user to review the
installation settings, if necessary. Click
on the Install button to install the
software.
Page 5 will display a progress bar as the
installation proceeds.
Note: The installation should only take a
few minutes.