Tech Source Raptor X Servers for Tru64 UNIX - Manual (Page 22)

Raptor X Servers for Tru64 UNIX Installation & Reference Manual
4-2
To disable X Windows on a selected card, use the
-disableScreen
option. For example,
prompt# X –disableScreen1
This will start up X on the cards associated with screen 0,
screen 2, screen 3, etc.
To bring up X Windows on a selected card only, use the
-onlyScreen
option and refer to the screen number of that
card.
prompt# X –onlyScreen0
This will start up Windows on screen 0 only.
To determine the number of screens and the screen numbers,
type:
prompt# /usr/sbin/sizer –gt
The first card listed is screen 0, the second card is screen 1, and
so on.
4.3 Setting Depth and Resolutions
The resolutions are configurable on Raptor 1100T, Raptor 1000
and GFX-8PD. The bit-depths are configurable on all T-Class &
GFX-8PD cards. MOX configuration is available on both I-Class
and T-Class cards. This section discusses how to change the
resolutions and bit depths of these cards.
NOTE: The -screenOrder option should list all the screens.
Omitting any screen will cause the X Server to crash.