Tech Source Raptor X Servers for Tru64 UNIX - Manual (Page 24)

Raptor X Servers for Tru64 UNIX Installation & Reference Manual
4-4
To start X Windows on the Raptor GFX-8PD in 24-bit only mode,
on Tru64 5.0 and later type:
prompt# /usr/bin/X11/X -depth 24 -lbx
On Tru64 4.0f type:
prompt# /usr/bin/X11/X –depth 24
To start X Windows on the Raptor GFX-8PD in 8+24 bit mode,
on Tru64 5.0a and later type:
prompt# /usr/bin/X11/X -depth 32 -lbx
On Tru64 4.0f type:
prompt# /usr/bin/X11/X –depth 32
When configured in the 8+24 mode, both PseudoColor (8-bit)
visual and TrueColor (24-bit) visuals are supported
simultaneously, with the PseudoColor visual being the default
visual. The default visual can be changed to the TrueColor.
To start X Windows in the 24-bit only mode, type:
prompt# /usr/bin/X11/X -depth 24 -lbx
To change the default visual in the 8+24 mode to 24-bit
TrueColor type:
prompt# /usr/bin/X11/X -depth 32 \
-vclass TrueColor -lbx
NOTE: The -lbx option must be specified in 24-bit only and
8+24 bit modes when using TRU64 UNIX version 5.0A and
later.