Tech Source Raptor X Servers for Tru64 UNIX - Manual (Page 27)

Chapter 4 – Invoking X Windows
4-7
4.3.4 Depth Options for I-Class Cards
I-Class Cards can be started up in 8-bit and MOX modes. On
these cards X Windows starts up in 8-bit mode by default. An
explanation of different MOX modes can be found in Section 4.4.
To start X Windows in MOX16 mode, set the STARSMODE
environment variable to +mox16 before starting up the X Server.
prompt# setenv STARSMODE +mox16
To start the X Windows in MOX24 mode, set the STARSMODE
environment variable to +mox24 before starting up the X Server.
prompt# setenv STARSMODE +mox24
4.3.5 Editing the Xserver.conf File
As an alternative to specifying the resolution on the command
line, the X Windows configuration file Xserver.conf may be
edited. For example, to set the resolution to 1600x1200@60,
modify the last line in /var/X11/Xserver.conf as follows:
args<
-screen 1600x1200 –vsync 60 –pn
>
NOTE: The –pn option allows the X Server to come up even if it
cannot listen in on all ports. It is highly recommended.
The above changes will apply to all screens.