Tech Source Raptor X Servers for Tru64 UNIX - Manual (Page 8)

Raptor X Servers for Tru64 UNIX Installation & Reference Manual
1-2
Raptor 2500T-DL
Supports 2048x2048 resolutions (digital) and
drives the Raptor 2100 and Raptor 2500 LCD
Flat Panels.
For applications that require a graphics boot console at a low
resolution, as an alternative to Powerstorm & Elsa-Gloria cards,
Tech Source provides a low cost solution called the Raptor GFX-
8PD
The software is a set of kernel device drivers and X Window System
loadable device-dependent modules, which are installed and
uninstalled using the standard utility setld. You may refer to the
man page for setld before continuing.
The software consists of four packages:
•
RAPTOR503 Drivers for the Raptor 2000 (12M), Raptor
2000 (24M) and Raptor 1000 (I-Class
Cards)
•
RAPFT503 Drivers for Raptor 2100T, Raptor 1100T and
Raptor 2500T-DL (T-Class Cards)
•
RAPMOX503 MOX eXtension libraries and include files
along with demos and examples
•
GFXP502 Drivers for the Raptor GFX-8PD card
Read the label on your Raptor graphics card to determine the model
of card that you have. Alternatively, you can also look at Appendix
B and identify your card based on the drawings and descriptions.
From this point forward, all Raptor products will be referred to as
Raptor cards. The Raptor 2000 (12M) and the Raptor 2000 (24M)
will be referred to as Raptor 2000. The company name, Tech
Source, Inc., will be referred to as Tech Source or TSI.
NOTE: This software supports Tru64 UNIX 4.0f and higher. Tru64
UNIX was formerly called Digital UNIX.