Tech Source Raptor X Servers for Tru64 UNIX - Manual (Page 26)

Raptor X Servers for Tru64 UNIX Installation & Reference Manual
4-6
To start X Windows in 8-bit only mode, set the STARSMODE
environment variable to +8 before starting up the X Server.
prompt# setenv STARSMODE +8
To start X Windows in 8+8-bit mode, set the STARSMODE
environment variable to +8+8 before starting up the X Server.
prompt# setenv STARSMODE +8+8
To start X Windows in 8+24-bit mode, set the STARSMODE
environment variable to +8+24 before starting up the X Server.
prompt# setenv STARSMODE +8+24
To start X Windows in 24-bit mode, set the STARSMODE
environment variable to +24 before starting up the X Server.
prompt# setenv STARSMODE +24
To start X Windows in MOX16-bit mode, set the STARSMODE
environment variable to +mox16 before starting up the X Server.
prompt# setenv STARSMODE +mox16
To start X Windows in MOX24-bit mode, set the STARSMODE
environment variable to +mox24 before starting up the X Server.
prompt# setenv STARSMODE +mox24
To start X Windows in MOX32-bit mode, set the STARSMODE
environment variable to +mox32 before starting up the X Server.
prompt# setenv STARSMODE +mox32
If the server is started in multi-screen mode then all screens will
be set to the specified bit-depth.