Tech Source GFX 550e - Manual (Page 13)

Chapter 3 – Software Installation
3-3
5. If
/cdrom/cdrom0
exists, type:
prompt# cd /cdrom/cdrom0
Skip to step 6. Otherwise, mount the CD-ROM by typing
the following:
prompt# mount -F hsfs -O -o ro \
/dev/dsk/c0t6d0s0 /cdrom
prompt# cd /cdrom
6.
The CD-ROM contains an
install_all
script. To
install the software, type:
prompt# ./install_all
This script will ask you a number of yes-or-no questions
(generated by Sun's
pkgadd
install script). Answer
these questions appropriately.
7.
Reboot the system to complete the installation.
NOTE: Upon reboot, new device names will be created in the
/dev/fbs
directory, one for each head.
The GFX 550e device names have a prefix
mko#
, where
#
represents the instance number assigned by the operating
system. For this product, a single device name is created. For
instance, it may be called
mko0
.