Tech Source GFX 550e - Manual (Page 18)

GFX 550e Installation and Reference Manual
3-8
NOTE: By default, the bit depth will be set to 24 for all
resolutions.
3.4.2.1 Examples
To configure the resolution on the GFX 550e card to
1152x900@66Hz, type the following:
prompt# mkoconfig -res 1152x900x66
NOTE: If no device is specified,
mkoconfig
configures the
console (assuming that the console is a GFX 550e card).
To verify the resolution prior to setting it permanently, add the
word "try" after the resolution name. This option will display a
test pattern on the screen until a return key is hit. Then the
resolution can be accepted or rejected. For example:
prompt# mkoconfig -dev /dev/fbs/mko0 \
–res 1152x900x66 try
To set the resolution to 1024x768x60 with a single TrueColor
visual (no 8-bit PseudoColor visual):
prompt# mkoconfig -res 1024x768x60 \
-24only enable
To display the current settings for
/dev/fbs/mko0
:
prompt# mkoconfig -dev /dev/fbs/mko0 -propt