Venstar T2900 - Manual (Page 24)

Program On will activate the
time period program for the
heating and cooling
setpoints. (occupied or
unoccupied periods)
Time Schedule for
Heating or Cooling
PROGRAMMABLE WITH Auto-Changeover - If the thermostat is
configured to be a programmable thermostat with Auto-Changeover,
the following screens will be available by pressing the MODE button.
Press
MODE
Press
MODE
Press
MODE
Press
MODE
Page 4.7
The HEAT setting indicates the
temperature the room has to
reach before the furnace will
turn on to heat the room.
Heating Only
The COOL setting indicates the
temperature the room has to
reach before the air conditioner
will turn on to cool the room.
Cooling Only
AUTO will automatically select
heat or cool based on room
temperature demand.
Heating or Cooling
OFF indicates both heating
and air conditioning
systems are turned off.
Off
4
Operating Mode when the Thermostat
is Configured to be:
Select the Mode by Pressing the MODE Button
Su
70
12:00
H EAT
68
Su
70
12:00
C OOL
76
AUTO
Su
70
12:00
H EAT
C OOL
76
68
Su
Program On
70
12:00
H EAT
C OOL
76
68
OFF
Su
70
12:00
Pm
Pm
Pm
Pm
Pm
occupied