Venstar T2900 - Manual (Page 74)

Page 14.5
Time-Based Control of the
Programmable Output
14
Press
MODE
Adjust the programmable
output stop time for Monday
If Yes is selected:
If No is selected:
Press
MODE
Press
FAN
Yes
No
Mo
Setup
Tu
If Step 32 is set for 1-Day, then Day of the
Week and Copy functions do not appear or apply.
Select Yes to copy the
previous day’s program
to this day.
Selecting Yes, then pressing FAN will copy the
previous day’s program. If yes is selected each
time, this routine will repeat.
Once configuration of the programmable output has been
completed, press the MODE button to move on to the next
setup step, or press the PROGRAM button to exit Advanced
Setup.
If No is selected, as in previous steps, flashing prompts for input will appear for
the start and stop times for the next day.
Stop Pm 35 9:00
CO
PY
NO