Venstar T2900 - Manual (Page 28)

Page 5.3
Viewing the Indoor Humidity
5
Requires the Humidity Module (optional accessory) to be
installed. To display the current humidity at the thermostat,
press the HUMIDITY button. The display will then show the
current indoor humidity along with the humidification setpoint
(Section 9).
Note: The humidity reading will not appear unless the Humidity
Module has been installed. If the Humidity Module has not been
installed dashes will appear in place of the humidity reading.
HUMIDITY
Press
HUMIDITY
Current Room Humidity
Press the HUMIDITY button
again to return the display
to normal operation.
To view the indoor humidity
reading, press the
HUMIDITY button
NOTE: Due to variations in environmental conditions, it is not always possible
to achieve the desired humidification or dehumidification setpoint.
Humidify
Setup
0
1
rh
40