Configuration menu -3 – Verilink DIU 2130 (880-503297-001) Product Manual User Manual

Page 21

Advertising
background image

DIU 2130 Quick Set-up

Verilink

2-3

Configuration

Menu

There is a brief delay as the SCC module tries to communicate with
a CSU module in Shelf 0, Slot 0 since this is the default value for
CSU assignment in a new DIU 2130 module. An address of Shelf 0,
Slot 0 is not a valid address. Modules are shipped this way,
however, so that they may be added to a shelf without interfering
with any existing applications. An error message displays:

No response from csu[ 0,0 ]

No response from csu[ 0,0 ]

No response from csu[ 0,0 ]

No response from csu[ 0,0 ]
The error message, in this case, means that the DIU 2130 is new
and has never been assigned to any CSU module in any slot of any
shelf. Ignore this error message.

Then the DIU 2130 Configuration/Diagnostic Menu displays.

Figure 2-2 DIU 2130 Configuration Menu

The CSU command assigns the DIU 2130 module to the CSU it will
use. Since the SCC 2020 contains a TAC 2010 CSU module, it will
be used for the CSU in this example.

Type C and press ENTER.

At the

enter shelf >

enter shelf >

enter shelf >

enter shelf > prompt type 1 and at the enter slot >

enter slot >

enter slot >

enter slot > prompt

type 1 again.

This selects the SCC 2020 in slot 1 of shelf 1 as the CSU for this DIU
2130 module.

--- DIU 2130 CONFIGURATION/DIAGNOSTIC MENU ---

--- DIU 2130 CONFIGURATION/DIAGNOSTIC MENU ---

--- DIU 2130 CONFIGURATION/DIAGNOSTIC MENU ---

--- DIU 2130 CONFIGURATION/DIAGNOSTIC MENU ---

C) CSU [ 0,0 ]

C) CSU [ 0,0 ]

C) CSU [ 0,0 ]

C) CSU [ 0,0 ]
T) timing source CSU

T) timing source CSU

T) timing source CSU

T) timing source CSU

chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Dp)port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Dp)port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Dp)port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Dp)port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Lead Toggles DTR) DSR) RTS) CTS) DCD)

Lead Toggles DTR) DSR) RTS) CTS) DCD)

Lead Toggles DTR) DSR) RTS) CTS) DCD)

Lead Toggles DTR) DSR) RTS) CTS) DCD)
Forced Ports -/- -/- -/- -/- -/-

Forced Ports -/- -/- -/- -/- -/-

Forced Ports -/- -/- -/- -/- -/-

Forced Ports -/- -/- -/- -/- -/-

Port 1 Port 2 Statistics

Port 1 Port 2 Statistics

Port 1 Port 2 Statistics

Port 1 Port 2 Statistics
Mp) mode 56K 56K FW/HW Rev.............1.6/0.8

Mp) mode 56K 56K FW/HW Rev.............1.6/0.8

Mp) mode 56K 56K FW/HW Rev.............1.6/0.8

Mp) mode 56K 56K FW/HW Rev.............1.6/0.8
Sp) scram/hdlc inv N/N N/N Battery...............OK

Sp) scram/hdlc inv N/N N/N Battery...............OK

Sp) scram/hdlc inv N/N N/N Battery...............OK

Sp) scram/hdlc inv N/N N/N Battery...............OK
Kp) clocking ST ST DTE Intf..............V.35/V.35

Kp) clocking ST ST DTE Intf..............V.35/V.35

Kp) clocking ST ST DTE Intf..............V.35/V.35

Kp) clocking ST ST DTE Intf..............V.35/V.35
Gp) LOS lead NONE NONE Data bus..............NONE

Gp) LOS lead NONE NONE Data bus..............NONE

Gp) LOS lead NONE NONE Data bus..............NONE

Gp) LOS lead NONE NONE Data bus..............NONE

Ep) enable loop YES YES Tp) test and monitor BEC

Ep) enable loop YES YES Tp) test and monitor BEC

Ep) enable loop YES YES Tp) test and monitor BEC

Ep) enable loop YES YES Tp) test and monitor BEC
Np) near loopback OFF OFF Pp) monitor leads and status

Np) near loopback OFF OFF Pp) monitor leads and status

Np) near loopback OFF OFF Pp) monitor leads and status

Np) near loopback OFF OFF Pp) monitor leads and status
Fp) far loopback ON OFF A) Alarm Enable......YES

Fp) far loopback ON OFF A) Alarm Enable......YES

Fp) far loopback ON OFF A) Alarm Enable......YES

Fp) far loopback ON OFF A) Alarm Enable......YES

[1,2] DIU 2130 >

[1,2] DIU 2130 >

[1,2] DIU 2130 >

[1,2] DIU 2130 >

Advertising