Westermo GDW-11 - Manual (Page 121)

Supplementary Services commands 121 6615-2220
+CLIP – Calling line identification presentation
Description:
This command allows control of the Calling Line Identifier presentation supplementary
service. When presentation of the CLI (Calling Line Identifier) is enabled (and calling sub-
scriber allows), +CLIP response is returned after every RING (or +CRING) result code.
Syntax:
AT+CLIP=<n>
Response syntax: (for an incoming call, after each RING or +CRING indication)
+CLIP: <number>, <type>[ ,<subaddr>, <satype>, <alpha> ]
Parameters:
<n>
Parameter sets/shows the result code presentation in the TA
0: Disable
1: Enable
<m>
Parameter shows the subscriber CLIP service status in the network
0: CLIP not provisioned
1: CLIP provisioned
2: Unknown (no network…)
Command example Possible responses Note
AT+CLIP=1 OK Enable CLIP
RING Incoming call
+CLIP: “0146290800”, Incoming call with number
129,1,,”FRED” and name presentation
RING Incoming call
+CLIP: “0146290800”, Incoming call with number
129,1,,”8000204212FFFF” and name presentation
(UCS2 format)
AT+CLIP=0 OK Disable CLIP presentation