Westermo GDW-11 - Manual (Page 236)

236 GPRS commands 6615-2220
For <n> = 0: GPRS network requests are manually accepted or rejected by the
+CGANS command.
For <n> = 1: GPRS network requests are automatically accepted according to the
description above.
For <n> = 2: automatic acceptance of GPRS network requests is controlled by the
'S0' command. Manual control uses the 'A' and 'H' commands, respec-
tively, to accept and reject GPRS requests. (+CGANS may also be
used.) Incoming circuit switched calls can be neither manually nor auto-
matically answered.
For <n> = 3: automatic acceptance of both GPRS network requests and incoming
circuit switched calls is controlled by the 'S0' command. Manual control
uses the 'A' and 'H' commands, respectively, to accept and reject GPRS
requests. (+CGANS may also be used.) Circuit switched calls are han-
dled as described elsewhere in this specification.
NOTE:
In class C GPRS the modem can’t receive simultaneously GPRS and GSM incoming calls.
Command example Possible responses Note
AT+CGAUTO=? +CGAUTO: (0-2) Test command
OK
AT+CGAUTO? +CGAUTO: 2 Current value
OK
AT+CGAUTO=0 OK Turn off automatic
response for GPRS only