Westermo GDW-11 User Manual

Page 249

Advertising
background image

I/O commands – only in GDW-12 249

6615-2220

<flag>

Defines if the establishment of service shall be retried, the time between retries is con-
trolled by register S7.

0:

NO, No retry, tries once to perform requested action

1:

RETRY, Retry infinitely to establish service according to current table entry.

2:

RETRY_3, Do 1 try and max 3 retries.

3:

NEXT_OK, If current service ends with OK the service specified by next table
entry will be trigged. If fail to perform/establish the current entry service the unit
will return to idle.

4:

NEXT_ERR, The unit will execute service specified by next table entry if fail to per-
form/establish current service.

NOTE:

If service according to current table entry terminates normally, the unit will return to idle
and wait for any new event trigger.

<timeout>

Timeout is used in Dial and Transparent I/O. The timeout is designed as an inactivity
timer and will be retrigged for each Data / I/O transfer. The timeout is the only normal
way to terminate Dial and Transparent I/O.

0:

The service will not be terminated

1 – 255: The timeout is specified in units of 10s.Valid values 1 – 255 *10 s

(10s – 2550s)

NOTE:

… Please see Table 1 for reference of state after termination by timeout.

… Setting a timeout for any other service than transparent I/O will not cause any fail-

ure but will not have any function.

<priority>

Priority of the service specified.

0:

An existing connection will not be terminated Retries will be made according to
setting of <flag>, time between retries is set by register S7.

1:

The current connection will be terminated before the connection specified by serv-
ice is established.

<data1>

The interpretation of this field depends on the service specified for the entry. The field
accepts 0 – 20 characters. The table below describes the different functions of <data1>
field in each different service.

DIAL:

Number to connect to

SMS:

Phone number of SMS receiver

TEXT:

Phone number of TEXT receiver, if left empty the TEXT is sent out on the
local DTE connection.

EMAIL: Reserved.

Advertising
This manual is related to the following products: