Westermo GDW-11 - Manual (Page 193)

Specific AT commands 193 6615-2220
+CPHS – CPHS command:
Description:
This command is used to activate, deactivate or interrogate a CPHS feature
(e.g. Mail Box Number . . .)
NOTE:
This command may answer +CME ERROR: 3 if the CPHS feature is disabled
(cf. +WFM command), or if the SIM card does not support this CPHS feature.
Syntax:
AT+CPHS=<Mode>,<FctId>[,<precision>]
Response Syntax:
+CPHS: <FctId1>,<Status><CR<LF>
+CPHS: <FctId2>,<Status><CR<LF>
Parameters:
<Mode>
0: Deactivate a CPHS feature
1: Activate a CPHS feature
2: Interrogate a CPHS status
NOTE:
The deactivate or activate command has not effect for Alternate line service, Network
Operator Name, CPHS information and Customer Profile Service features.
<FctId>
1: Voice Mail Indicator (not supported)
2: Mail Box Number
3: Alternate Line Service
4: Diverted Call Indicator
5: Network Operator Name
6: CPHS Information
7: Customer Service Profile
NOTE:
The Customer Service Profile and Alternate Line Service features are activated if the field
is set in CPHS information and CSP files. The Network Operator Name is activated if at
least one of the two format names exist (Long or Short format).This is done at initializa-
tion.