AEC Econo-Cool Chillers - Manual (Page 4)

AEC Water Temperature Control Units Page 3
Safety Considerations
Economical Series temperature control units are designed to provide safe and reliable operation
when installed and operated within design specifications, following national and local safety
codes.
To avoid possible personnel injury or equipment damage when installing, operating, or
maintaining this equipment, use good judgment and follow these safe practices:
; Only PROPERLY TRAINED personnel familiar with the
information within this manual should work on this
equipment.
; Follow all local SAFETY CODES.
; AEC Economical Series cabinets and piping are hot and are
a BURN HAZARD.
; Do not operate an AEC system without all outer panels
installed. Pressurized hot water leaks can cause serious
injury.
; Wear SAFETY GLASSES and WORK GLOVES.
; Use care when LOADING, UNLOADING, RIGGING,
or MOVING this equipment.
; Operate this equipment within design specifications.
; OPEN, TAG, and LOCK ALL DISCONNECTS before
working on equipment. We recommend following OSHA
Lock-Out/Tag-Out Standard 29 CFR 1910.147.
; Make sure the unit is properly GROUNDED before
switching power on.
; When welding or brazing in or around this equipment, be
sure VENTILATION is ADEQUATE. PROTECT
adjacent materials from flame or sparks by shielding with
sheet metal. An approved FIRE EXTINGUISHER should
be close at hand and ready for use if needed.
; Do not jump or bypass any electrical safety control.
; Do not restore power until all tools, test equipment, etc.
have been removed and the panels replaced.