AIRLESSCO SS4550 - Manual (Page 38)

A
IR
L
E
S
S
C
O
A
CCESSORIES
Strong yet flexible, for airless sprayers up to 3300 PSI
Part No: Hose Description
100-012 3/16” Whip Hose, 4 Ft.
100-040 1/4” Whip Hose, 3 Ft.
100-204 1/4” Whip Hose, 5 Ft.
100-199 3/8” Whip Hose, 6 Ft.
100-011 1/4” Hose, 50 Ft.
100-023 3/8” Hose, 50 Ft.
100-037 1/2” Hose, 50 Ft.
100-010 1/4" Hose Connector
100-009 3/8" Hose Connector
STAY CLEAN
™
Spray protectant for machine
to prevent paint from sticking
to it. Keeps your sprayer
looking new for years!
114-030 20 oz. can
Case quantity: 12 cans
THROAT SEAL OIL
Used in the wet cup of a piston pump
to prevent paint from drying on the pis-
ton & causing damage to the upper
packing. Use with all piston pumps.
188-187 6 oz. Bottle
188-392 1 qt. Bottle
PUMP CONDITIONER
Should be used on piston pumps
between uses to prevent paint from
drying on the piston & causing pack-
ing wear.
010-001 Display of 48 - 1 oz. bottles
010-009 1 quart bottle
010-019 1 Gallon bottle
Case quantity: 12 on quarts, 4 on gallons
PAINT STRAINERS
Pre-filter your paint using strainer
bags. One dozen per pack.
100-064 Used to cover suction filter
100-065 5 Gallon strainer
HOSE COVER
4 mil poly protects your
airless hose from paint and
abrasion damage. Comes in 1000'
roll with perforations each 50'.
100-219 Hose Cover Roll
100-426 Case of 6 Rolls
HIGH PRESSURE AIRLESS HOSE
Standard Tip Extension
Swivel Extension
Bare Pole
Quick Flush
™
■ The only clean water flushing system
■ Cuts sprayer clean-up time in half!
■ Connects to standard garden hose
to backflush sprayer through gun
■ Includes "F" and "G" adapters to
work with all brands of gun
Part # 170-005
Quick Flush
PAINT HOPPER
For use on small jobs where paint is
kept in smaller than 5 gallon containers.
Threads onto pick-up tube of carry or
LoBoy framed Airlessco sprayers.
331-775 6 Liter Paint Hopper
"F to G" Gun adapter to attach
Graco
®
tips to Airlessco guns.
032-012
ADAPTERS
90° Pole to Gun Adapter
032-042
Gun Nut “F” Thread 11/16-16
032-010
Gun Nut “G” Thread 7/8-14
032-011
XTEND-A-POLE SYSTEM
STANDARD TIP EXTENSION, “G” Thread
032-170 6” Long
032-171 12” Long
032-172 18” Long
032-173 24” Long
SWIVEL EXTENSION, “G” Thread
032-184 36” Long
BARE POLE
Add Tip Extension or Swivel Extension to
create desired length
032-053 24” Long
032-054 36” Long
SWIVEL “G” THREAD
032-035 7/8" x 14 Swivel