Alinco DJ-V57 - Manual (Page 26)

4.Basic Operation
4
26
4.5.2 Setting the Tuning Step
1. Press the FUNC key in the VFO mode, and while is displayed, press the
key to display the current tuning step.
2. Rotate the dial to select the desired tuning step.
3. Press any key except for the MONI key to complete setting.
NOTE:
• Tuning step can't be changed in the Memory mode and Call-Channel mode.
• When the tuning step is changed from 5kHz,10kHz,15kHz,20kHz or 30kHz to
12.5kHz and 25kHz or vice versa, the operating frequency and the shift width
automatically suite to the new setting.
DOWN
STP-5 STP-10 STP-12.5 STP-15 STP-20 STP-25 STP-30
(unit: kHz) UP
Tuning step
5.0kHz
10.0kHz
12.5kHz
15.0kHz
20kHz
25kHz
30kHz
Entry completion digit
1kHz
10kHz
10kHz
10kHz
10kHz
10kHz
10kHz
Final digit selection
Accept 0 or 5 as valid number.
Accept any of 0 to 9 keys.
When you input the 10kHz digit, the 1kHz digit is
set automatically as follows.
0---00.0, 1---12.5, 2---25.0, 3---37.5, 4---invalid,
5---50.0, 6---62.5, 7---75.0, 8---87.5, 9---invalid
Auto-complete after the 10kHz digit entry.
Auto-complete after the 10kHz digit entry.
When you input the 10kHz digit, the 1kHz digit is
set automatically as follows.
0---00.0, 2---25.0, 5---50.0, 7---75.0
Other entries are invalid.
Auto-complete after the 10kHz digit entry.