Alinco DJ-V57 - Manual (Page 57)

10.Maintenance and Reference
10
57
10.2.1 All Resetting
When you reset the unit, all settings are returned to the initial factory settings. The
reset deletes the programmed memory channels also.
1. Turn on the unit with the FUNC and keys pressed together.
2. All the icons appear on the display.
Release the keys. All display will disappear for 2 seconds, and then reappear. The
initial mode is the VFO.
10.2.2 Partial Resetting
When you perform partial resetting, all settings except the programmed memory
channels are returned to the factory defaults.
1. Turn on the unit with the FUNC key pressed.
2. All the icons appear on the display.
Release the keys. All display will disappear for 2 seconds, and then reappear. The
initial mode is the VFO.
Factory default settings
VFO/CALL Frequency (VHF)
VFO/CALL Frequency (UHF)
Memory Channel
Channel Step
Shift
Offset Frequency (VHF)
Offset Frequency (UHF)
Tone Setting
Tone Frequency
DCS Setting
DCS Code
Transmitter Output
Auto Dialer Code
Keylock
Time-Out-Timer
Auto-Power-Off
Volume Level
Squelch Level
Repeater Shift
Repeater Offset Frequency (VHF)
Repeater Offset Frequency (UHF)
Repeater Tone Setting
DJ-V57T
145.000MHz
445.000MHz
0
∼199ch Blank
5kHz
None
0.6MHz
5MHz
None
88.5Hz
None
23
Low
None
off
0ff
off
15
3
-
0.6MHz
5MHz
88.5Hz
DJ-V57E
145.000MHz
435.000MHz
0
∼199ch Blank
12.5kHz
None
0.6MHz
7.6MHz
None
88.5Hz
None
23
Low
None
off
off
off
15
3
-
0.6MHz
7.6MHz
88.5Hz
DJ-V57T1
145.000MHz
415.000MHz
0
∼199ch Blank
5kHz
None
0.6MHz
5MHz
None
88.5Hz
None
23
Low
None
off
0ff
off
15
3
-
0.6MHz
5MHz
88.5Hz
NOTE:
THE ALL RESET DELETES ALL THE MEMOORIES.
Please take notes of the important data and keep it for future reference.
There is no way to restore the memory data once it's deleted.
Resetting 10.2