Alinco DR-635 - Manual (Page 28)

26
Parameter Setting Mode
NOTE: The Alphanumeric Channel Tag setting will not appear in the menu until memories have been programmed
first!
A list of the setting mode Parameters
Cut and keep the following list of the setting mode parameters for your convenience.
IMPORTANT: Please read the following pages thoroughly prior to changing any parameters.
THE PARAMETERS CANNOT BE SET WITHOUT ENTERING THE SET MODE.
By entering the Parameter Setting mode, some of the radio’s operating parameters can be changed
to suit your application. The following is the Selectable Parameters’ Menu.
Press the FUNC key /UP key
Press the SQL/DOWN key
Default display Function
STEP 20 Channel Step setting
TIMER Scan type switching
BEEP 2 Beep sound ON/OFF
TOT OFF Time-Out-Timer ON/OFF
TOTP OFF TOT penalty ON/OFF
APO OFF Auto-Power-Off ON/OFF
ALERT Tone Burst frequency setting*
CKSFT OFF Clock Shift setting
BELL OFF Bell function setting
BCLO OFF Busy-Channel-Lock-Out setting
SCR OFF Theft Alarm ON/OFF
TX-COL 3 TX display color
RX-COL 3 RX display color
SB-COL 3 Stand -By display color
LAMP 4 Dimmer setting
C Call sign setting (packet)
HB 1200 Transmission speed setting (packet)
BCON 0 Beacon interval setting (packet)
Parameter Setting Mode
*DR-635E has TB1750 Tone burst frequency as the default.