Alinco DJ-100 - Manual (Page 24)

Professional
FM Transceiver
07
INSTALLATION & CONNECTION
Installing / Removing the Li-ion Battery
1.Match the three grooves of the battery pack with the
corresponding guides on the back of the transceiver,
then push it.
2.Press the battery and transceiver firmly together until the
release latch on the top of the transceiver locks. After
hearing a“click”sounds, the battery has been locked.
3.To remove the battery, slide up the release latch and
remove the pack away from the transceiver.
How to Store the Battery
1.The battery should be kept in the status
of 50% discharge when storing.
2.It should be kept in cool, dry environment
and remove it from the transceiver.
3.Keep away from source of heat and
direct sunlight.
WARNING
Do notshort-circuit battery terminals.
Never attempt to remove the casing from the battery
pack.
Never assemble the battery hazardous in explosive
atmosphere as, spark may cause explosion.
Do not put the battery in hot environment or throw it
into fire, it may also cause explosion.
NOTE: Battery pack discharges faster when it is attached to the radio. Please always remove it from the
radio when not in use.