Priority monitor tx power selection, Advansed operations – Alinco DJ-100 User Manual
Page 40
Professional
FM Transceiver
23
Note: To activate this feature, it is required to set and select the priority channel in advance.
In VFO mode, after pressing
key, while icon is displayed on the top
left corner, press
key to activate the priority monitor. PRI icon appears
and monitors preprogrammed priority channel once every 5 seconds. When
the priority channel receives a matching signal, it will stay tuned to the priority
channel until current signal disappears. Press any keys other than D key to exit.
Priority Monitor
TX Power Selection
After pressing
key, while icon is displayed on the top left corner, press
key to set the output
power. When the bottom left corner of screen displays '
H' the power is 5W/high power.‘L’ for 0.5W.
When nothing is displayed, the output power is middle/2W.
ADVANSED OPERATIONS