Alinco DJ-100 - Manual (Page 35)

Professional
FM Transceiver 18
ADVANSED OPERATIONS
���� � ��� ����� �����
Channel Edit
Delete Channel
FM Radio Receiver
1.In main channel frequency mode or sub-channel frequency mode, enter the frequency and signaling
as desired, after pressing key, the top left corner of LCD displays " ", then press , the
channel number twinkling means getting into store/ delete channel mode.
2.Turn main dial to select the desired channel address to store.
3.Press
key, and then hold for 2 seconds, after two "beep" sounds, this channel has been stored.
1.In Standby state, after pressing key, the top left corner of LCD displays " " , then press ,
the channel number twinkling means getting into store/ delete channel mode.
2.Turn selector knob to select the channel which you want to delete.
3.Press
key, and hold key for 2 seconds, the frequency disappear with in two "beep"
sounds, the channel has been deleted.
1. Under standby state, press key, top left corner of LCD displays " " icon,then
press key again, LCD displays " FM" icon and "FM ON" , FM radio function
is on.
2. While "
FM ON" is indicated on the display, press key to turn on/off FM
radio function, FM radio is on when LCD displays " FM ON", FM radio is off
when LCD displays " FM OFF".
Note: Most part of this ADVANSED OPERATION chapter is useless for preprogrammed radio users. ●