Alinco DJ-100 - Manual (Page 43)

Professional
FM Transceiver 26
Manually Transmitting DTMF Signaling
DTMF Code Searching And Setup
After pressing key, the top left corner of LCD displays" " then press 0
key, it displays the current DTMF group. (16 groups in total)
1.Turn main dial to select the desired group and DTMF data, and press PTT
to transmit the desired DTMF data. It displays EMPTY when DTMF data is
not programmed yet.
2.Press key, the top left corner of LCD displays " ", press and hold 0
key for 2 seconds to enter DTMF editing menu. Use numerical keys to enter
DTMF characters. Press [PF2] key to transmit the tones, save the data and exit.
Method 1: hold [PTT] key and enter the number you need in keyboard.
Method 2: hold [PTT] key and enter the first number, release [PTT] key, the transceiver will stay in
transmitting situation in 2 seconds and you can keep on entering the numbers you need in
keyboard. You do not need to keep holding
[PTT] key to enter. When transmitting DTMF
frequency, you can monitor the frequency by the sounds making by the loudspeaker.
Remotely Kill/Revive
By transmitting preprogrammed KILL code, the radios that received the code
will become temporary out-of-service. When KILL code is received, KILL is
displayed and all keys and functions will be suspended for use.
ADVANSED OPERATIONS