The triton cradle 1-19, The triton cradle’s communication ports 1-19, The triton cradle – AML Triton Wireless Handheld Terminal User Manual
Page 25: The triton cradle’s communication ports
1 - 19
USER’S GUIDE
Triton Wireless Hand-held Terminal
The Triton Cradle’s Communication Ports
The Triton hand-held terminal has 2 different styles of communications ports, RS-232 (RJ-
45) and USB (Type II). The Triton Cradle also has 2 communications ports, RS-232 (DB-9) and
USB (Type II). The Triton Communications Cradle uses a standard RS-232 (DB-9 Male – DB-9
Female) cable.
ACC-7525 Charging Cradle
Both communication connectors on the back of the Triton cradle are wired “straight
through”. This means that the communications settings on the Triton handheld terminal will
determine the settings on the communication cradle. The Triton Cradle has no internal or
external settings that can be changed.
The high speed USB data port is used to load a new or updated operating system or settings
into the Triton hand-held.
DB-9 Pin out (RS-232)
1 – DCD (Data Carrier Detect)
6 – DSR (Data Set Ready)
2 – RXD (Receive Data)
7 – RTS (Request To Send)
3 – TXD (Transmit Data)
8 –CTS (Clear To Send)
4 – DTR (Data Terminal Ready)
9 – NC (No Connection)
5 - GND (Signal Ground)