AML Triton Wireless Handheld Terminal - Manual (Page 55)

2 - 30
USER’S GUIDE Triton Wireless Hand-held Terminal
2-Dimensional Imager Symbology Settings - cont’d.
Type Symbology Setting Parameter Available Options Option Description
Linear
(cont’d)
2 of 5 Interleaved Enabled/Disabled Enable/Disable decoding of
Interleaved 2 of 5 symbols
Check Digit 1.) Ignore Ignore check digits
2.) Verify Verify but do not transmit check digits
3.) Transmit Verify and transmit check digits
Interleaved Min Min: 0 characters Minimum length in characters to
allow a good read
Max: 80 characters
Interleaved Max Min: 0 characters Maximum length in characters to
allow a good read
Max: 80 characters
Industrial Enabled/Disabled Enable/Disable decoding of Industrial
2 of 5 symbols
Industrial Min Min: 0 characters Minimum length in characters to
allow a good read
Max: 48 characters
Industrial Max Min: 0 characters Maximum length in characters to
allow a good read
Max: 48 characters
IATA Enabled/Disabled Enable/Disable decoding of IATA 2 of
5 symbols
IATA Min Min: 0 characters Minimum length in characters to
allow a good read
Max: 48 characters
IATA Max Min: 0 characters Maximum length in characters to
allow a good read
Max: 48 characters
Matrix Enabled/Disabled Enable/Disable decoding of Matrix 2
of 5 symbols
Matrix Min Min: 0 characters Minimum length in characters to
allow a good read
Max: 80 characters
Matrix Max Min: 0 characters Maximum length in characters to
allow a good read
Max: 80 characters
Codabar Codabar Enabled/Disabled Enable/Disable decoding of
Codabar symbols
Start/Stop 1.) Skip Do not transmit start and stop characters
2.) Transmit Transmit start and stop characters
Check Digit 1.) Ignore Ignore check digits
2.) Verify Verify but do not transmit check digits
3.) Transmit Verify and transmit check digits
Concatenate 1.) Off Do not allow Codabar concatenation
2.) On Allow concatenation
3.) Required Require symbols to be concatenated