Configure the network with, Configure the network with the projector – Eiki Network Board MD13NET User Manual
Page 16
16
Installation
Configure the network with the projector
This example explains how to set the following configuration.
IP Address
: 192.168.1.201
Subnet Mask
: 255.255.255.0
Default Gateway : 192.168.1.1
DNS
: 0.0.0.0
A
1
Selection of network menu [Network]
Turn on the projector and display the menu on the screen. Select the
Network
icon from the
Setting
sub menu using the pointers, and then press the
SELECT
button on the remote control or on the projector. Confirm that its mode is set
On
.
If not, change mode to
On
using the pointer
/
.
2
Configuration for IP Address/ Subnet mask/Default Gateway*/DNS*
Press the
SELECT
button again, the following network setting menu appears on
the screen. Enter the specified network address with ▲/▼/
/
keys. The fol-
lowing is an example of a network configuration.
NETWORK SETTING
IP Address
Sub net
Gateway
DNS
192
168
1
201
192
168
1
1
255
255
255
0
0
0
0
0
SET
CANCEL
▲
▲
▲
▲
* In the network environments not using a Gateway or Router, the Default Gateway address
should be set to [0.0.0.0]. If you do not use the functions E-mail or DNS server, it should also
be set to [0.0.0.0] for the DNS address.
* The above on-screen display may differ from
the actual display depending on the functions
of the projector you use.