Eiki Network Board MD13NET - Manual (Page 52)

52
Controlling the Projector
Load a control set
Select your desired set number with the pull-down menu button of the Load Setting
No. and then press the Set button. The setting values of the selected set number are
applied to the current settings.
Example of setting
✐ If the contents of the saved set are not match for the slot equipped on the projector, the
invalid alert message may be displayed. For example, the message “Invalid setting for
SLOT1” will be displayed in the following case.
Example: In case of after setting the DVI computer input for SLOT1 and then it was changed
to video input board.