Check the status of projector, English – Eiki Network Board MD13NET User Manual

Page 37

Advertising
background image

The icons [A] and [B] represent the sensors located in the projector as follows:
[A]: Surrounding temperature of the projector *
[B]: Internal temperature of the projector
* The indicated peripheral temperature of the projector is a little higher than actual surrounding

temperature.

37

Network Board

OWNER’S MANUAL

Check the status of projector

ENGLISH

Items

Description

Lamp Mode

....................Displays 2 lamps or 4 lamps mode and lamp status as below icons with

Lamp1/Lamp2/Lamp3/Lamp4 order.

Accumulated
Lamp-use Time

..............Displays the accumulated lamp use time in hour units (h) and displays each

time with Lamp1/Lamp2/Lamp3/Lamp4 order.

Accumulated
Projector-use Time

..........Displays the accumulated projector use time in hour unit (h).

Power Status

..................Displays the status of the lamp.

Projector Condition

..........Displays the status of the projector's power.

Input Status

....................Displays the selected slot.

Selection

..........................Displays the selected input mode.

Signal Status

..................Displays the signal status of the selected input mode.

Internal temperature

........Displays the temperature at internal thermal sensors in degrees. The icons

[A] and [B] on the page represent the thermal sensors located in the projec-
tor. If the temperature at one of those sensors exceeds specified tempera-
ture, the appearance of its icon changes to the following alert icon to let
users know about the abnormal temperature. Please check surrounding tem-
perature of the projector, check for clogged air filters and check area sur-
rounding the ventilation fans.

Check the status of projector

In the “Power & Status” page, you can control the projector power, and also you can
check the status of the projector as follows. To change the page, click on the page
number linked text.

Yellow

................

Normal

Gray

................

Off

Red

................Lamp replacement required

Gray with X

................

Abnormality of the lamp

Advertising