Eiki Network Board MD13NET - Manual (Page 40)

40
Controlling the Projector
Save a Set
1
Decide your desired PC adjustment
values through the PC Adjustment
pages “1”to “2”.
2
Display the page “3” and select a mode
number with the pull-down menu button
of the
Save to . Type a memo into the
Memo text area for simple description of
your selected number.
3
Register by pressing the Set button.
To restore the adjustments, press the
Reset button.
Load a Set
Select a set to load with the pull-down menu button of the Load Set No. and press the
Set button. The stored setting values will be applied to the each PC adjustment item.
Select a mode by
clicking the button
Type a memo for
the selected mode
Select a load mode
by clocking the but-
ton
It is displayed with “Stored” or “Free” for
the memo of Mode1 to Mode5. The memo
of ExMode6 to ExMode50 can be stored
into the selected mode.
✐ The PC adjustment settings can be stored up to 50 sets, 5 sets for Mode1 to Mode5 and 45
sets for ExMode6 to ExMode50.