Eiki Network Board MD13NET - Manual (Page 8)

8
Preparation
Operating Environment
To perform the management and setting up the projector using this product, the envi-
ronment described below is required.
Operating System
Windows 95 / Windows 98 / Windows 2000 / Windows Me / Windows NT /
Windows XP
Mac OS 8.0 or later
Network
Network must handle Ethernet correctly and accept TCP/IP protocol.
Computer
The computer must provide a 10Base-T or 100Base-TX network card.
Web browser application*
● Microsoft Internet Explorer version 5.0 or later
● Netscape Navigator version 4.7 or later
* Use to control and set up the projector. The layout of pages in the browser may
slightly differ from each type of application or operating system you use.
Internet mail application*
● Microsoft Outlook ● Microsoft OutlookExpress
● Netscape Mail
* Required the internet e-mail application software to receive an e-mail alert sent
from this product. If you do not use the function E-mail Alert, this application is not
required.
The limitation* 1 of connection between this product and Hub or
Computer
Suitable LAN cables are limited by length and type as follows;
Connection Type of usable LAN cable Maximum length
Network Board - Hub UTP Straight Cable with category 3 or 5 * 2 100m
Network Board - Computer UTP Cross Cable with category 3 or 5* 2 100m
*1 There may be other limitations depending on your network environment or LAN specifica-
tion. Please consult your network administrator for further details.
*2 Category of LAN cable indicates the cable quality. Normally, cable with category 3 or 5 is
used for 10Base-T network and cable with category 5 is used for 100Base-TX network.