Archgard 27-DVIE22N - Manual (Page 21)

27-DVIE22
21
LOG PLACEMENT... Continued
L O G # 1
Locate Log 1 and align the holes in the bottom line up with the two locater pins. Push down firmly
onto locater pins.
L O G # 2
Locate log #2 using the locator pin on the burner for the left side. Sit the right side of the log into the
notch of log #1 (as shown in inset)
L O G # 3
Locate Log 3 and align the two holes in the log with the two locater pins on the left of the burner.
Push down onto locator pins as shown.
LOG #1
LOG #2
LOG #3
Fig. 21-A
Fig. 21-B Fig. 21-C
Fig. 21-D