Archgard 27-DVIE22N - Manual (Page 32)

27-DVIE22
32
This function is disabled when in SMART Thermostat Mode
REMOTE CONTROL SETUP AND OPERATION
TEMPERATURE INDICATION DISPLAY
With the system in the “OFF” position, press the Thermostat Key and the Mode Key at the same time to switch between
Fahrenheit (F) or Celsius (C). Verify on the LCD screen the correct designation is visible
Display in Fahrenheit Display in Celsius
VARIABLE FLAME CONTROL
The Proflame IFC has six (6) flame levels. With the system “ON” and the flame at maximum in the appliance, pressing the
Down Arrow Key once will reduce the flame height by one step. Repeat to lower the flame till “OFF”
The UP Arrow Key will increase the flame height each time it is pressed.
If the UP Arrow Key is pressed while the system is on but the flame is off, the flame will activate in the high setting.
A single “beep” will confirm reception of the command
In manual mode the fan will activate immediately upon
burner ignition. Adjust the fan speed to personal preference.
Blower will shut off when the burner is extinguished.
If the appliance is equipped with a hot air circulating fan, the speed of the fan can be controlled by the Proflame system. The fan speed
can be adjusted through six (6) speeds. To activate this function use the Mode Key to index to the fan control icon. Use the Up/Down
Arrow Keys to turn on, off or adjust the fan speed. A single “beep” will confirm reception of the command.
FAN SPEED CONTROL
Fig. 32-A
Fig. 32-B
Fig. 32-C