1/10gbase-t autosensing ethernet port leds, 100/1000base-x sfp port led, Sfp+ port led – H3C Technologies H3C S5130 Series Switches User Manual
Page 57
50
1/10GBase-T autosensing Ethernet port LEDs
The S5130-28TP-EI and S5130-28TP-PWR-EI switches provide two single-color LEDs for each
10/100/1000Base-T autosensing Ethernet port. When one of the two LEDs is on, the other is off.
The S5130-52TP-EI and S5130-52TP-PWR-EI switches provide a double-color LED for each
10/100/1000Base-T autosensing Ethernet port.
Table 23 1/10GBase-T autosensing Ethernet port LED description
Status Description
Steady green
A link is present on the port and the port is operating at 10 Gbps.
Flashing green
The port is sending or receiving data at 10 Gbps.
Steady yellow
A link is present on the port and the port is operating at 1 Gbps.
Flashing yellow
The port is sending or receiving data at 1 Gbps.
Off
No link is present on the port.
100/1000Base-X SFP port LED
The S5130-28F-EI switch provides a double-color LED for each 100/1000Base-X SFP port to show their
operating status.
Table 24 100/1000Base-X SFP port LED description
Status
Description
Steady green
A transceiver module is installed in the port. The port is operating at 1 Gbps, and
a link is present on the port.
Flashing green
The port is sending or receiving data at 1 Gbps.
Steady yellow
A transceiver module is installed in the port. The port is operating at 100 Mbps,
and a link is present on the port.
Flashing yellow
The port is sending or receiving data at 100 Mbps.
Flashing yellow (3 Hz)
POST has failed on the port.
Off
No transceiver module is installed in the port, or no link is present on the port.
SFP+ port LED
The S5130-28S-EI, S5130-28TP-EI, S5130-28S-PWR-EI, S5130-28S-HPWR-EI, and S5130-28TP-PWR-EI
switches provide two single-color LEDs for each SFP+ port to indicate their operating status.
Table 25 SFP+ port LED description for the S5130-28S-EI, S5130-28TP-EI, S5130-28S-PWR-EI,
S5130-28S-HPWR-EI, and S5130-28TP-PWR-EI switches
LED Status
Description
Green LED
Steady on
A transceiver module is installed in the port. The port is
operating at 10 Gbps, and a link is present on the port.