H3C Technologies H3C S5130 Series Switches - Manual (Page 58)

51
LED Status Description
Flashing The port is sending or receiving data at 10 Gbps.
Off
• No transceiver module is installed in the port, or no 10
Gbps link is present on the port.
• The port mode LED is operating in PoE mode (applicable
to the PoE switch models.)
Yellow LED
Steady on
A transceiver module is installed in the port. The port is
operating at 1 Gbps, and a link is present on the port.
Flashing (not 3 Hz) The port is sending or receiving data at 1 Gbps.
Flashing (3 Hz) POST has failed on the port.
Off
• No transceiver module is installed in the port, or no 1
Gbps link is present on the port.
• The port mode LED is operating in PoE mode (applicable
to the PoE switch models.)
The S5130-28F-EI, S5130-52TP-EI, S5130-52TP-PWR-EI, S5130-52S-PWR-EI, and S5130-52S-EI switches
provide a double-color LED for each SFP+ port to indicate its operating status.
Table 26 SFP+ port LED description for the S5130-28F-EI, S5130-52TP-EI, S5130-52TP-PWR-EI,
S5130-52S-PWR-EI, and S5130-52S-EI switches
Status Description
Steady green
A transceiver module is installed in the port. The port is operating at 10 Gbps and
a link is present on the port.
Flashing green The port is sending or receiving data at 10 Gbps.
Steady yellow
A transceiver module is installed in the port. The port is operating at 1 Gbps and
a link is present on the port.
Flashing yellow (not 3
Hz)
The port is sending or receiving data at 1 Gbps.
Flashing yellow (3 Hz) POST has failed on the port.
Off
• No transceiver module is installed in the port, or no link is present on the port.
• The port mode LED is operating in PoE mode (applicable to the PoE switch
models.)