H3C Technologies H3C S3100V2 Series Switches User Manual
Page 44
Advertising
38
Follow these steps to set terminal parameters:
Step1
Select Start > All Programs > Accessories > Communications > HyperTerminal to enter the
HyperTerminal window. The Connection Description dialog box appears, as shown in
.
Figure 50 Connection description of the HyperTerminal
Step2
Type the name of the new connection in the Name text box and click OK. The following dialog box
appears. Select the serial port to be used from the Connect using drop-down list.
Figure 51 Set the serial port used by the HyperTerminal connection
Step3
Click OK after selecting a serial port and the following dialog box appears. Set Bits per second to 9600,
Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None.
Advertising