H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 42)

36
===== Current CPU usage info =====
CPU Usage Stat. Cycle: 10 (Second)
CPU Usage : 5%
CPU Usage Stat. Time : 2000-04-26 12:14:04
CPU Usage Stat. Tick : 0x19(CPU Tick High) 0x630a8910(CPU Tick Low)
Actual Stat. Cycle : 0x0(CPU Tick High) 0x5ca8260f(CPU Tick Low)
TaskName CPU Runtime(CPU Tick High/CPU Tick Low)
VIDL 95% 0/5838f781
TICK 0% 0/ 2d0b28
STMR 0% 0/ 59a42
L2X0 0% 0/ 814bf9
bC.0 1% 0/ 13429c7
bLK0 0% 0/ b60514
…
Displaying detailed information about the device
Use the display device verbose command to display detailed information about the device.
• On the controller engine:
<H3C>display device verbose
Slot No Board Type Status Max Ports
0 WX5540ELSW Normal -
1 WX5540ERPU Normal 5
Table 5 Command output (on the controller engine)
Field Description
Slot No. Slot number of the controller engine.
Board Type Controller engine model.
Status
Operational status of the controller engine:
• Fault—The controller engine in the slot has failed and cannot boot correctly.
• Normal—The controller engine in the slot is operating correctly.
Max Ports Maximum number of interfaces that the controller engine supports.
• On the switching engine:
<H3C>display device verbose
Slot 1
SubSNo PortNum PCBVer FPGAVer CPLDVer BootRomVer AddrLM Type State
0 33 Ver.A NULL 002 002 1.01 IVL MAIN Normal
slot 1 info:
Up Time : 0 weeks, 0 days, 0 hours, 18 minutes
Board Type : H3C WX5540E-LSW
Board Status : Master
Software Ver : Alpha 2607P01
Patch Ver : None
PCB Ver : Ver.A