H3C Technologies H3C Intelligent Management Center - Manual (Page 48)

41
Figure 29 Installation Completed
11. Perform either of the following operations:
{
To start to deploy IMC NTA, select Open deployment monitoring agent.
{
To continue to install other IMC components, select Install other IMC Components.
In this example, select Open deployment monitoring agent.
12. Click Finish.
Deploying IMC NTA
1. In the Installation Completed window (see Figure 29 ), select Open deployment monitoring agent
and click Finish.
The system automatically starts the Intelligent Deployment Monitoring Agent and displays the
Batch deploy window, as shown in
Figure 30 .