H3C Technologies H3C Intelligent Management Center - Manual (Page 60)

53
Figure 43 Batch deploy
4. Select the subcomponents you want to deploy. In this example, select all EAD subcomponents and
click OK.
5. In the Configure Desktop Asset Manager Component window (see Figure 4 ), configure the
following parameters:
{
Database Password/Confirm Password—These fields are automatically populated with the
database password configured when the IMC Platform is installed. Do not change the values of
these fields unless the database password of the IMC Platform is changed after installation.
{
DAM Server's IP Address—This field displays the IP address of the host on which DAM is to be
deployed. By default, the IP address of the current host is displayed. Use the default value in this
example.