H3C Technologies H3C Intelligent Management Center - Manual (Page 51)

44
Figure 33 Batch deploy
4. Select the subcomponents you want to deploy. In this example, select all the subcomponents
except EIP Sub Server and User Access Management Sub Server and click OK.
5. In the Strategy Proxy Server Configuration window (see Figure 34 ), configure the following
parameters:
a. Enter the IP address of the host on which Strategy Proxy Server is to be deployed in the IPv4
Address(Client) field. In this example, use the default value of the parameter.
b. Enter the IP address of the host on which User Access Management is to be deployed in the
IPv4 Address(Server) field. In this example, use the default value of the parameter.