Grass Valley ADC-1101 - Manual (Page 13)

GUIDE TO INSTALLATION AND OPERATION
ADC-1101 | 9
Icon # Indicates appearance interpretation
1 Card control
status
Green if the card is controlled remotely
Yellow when locally controlled
2 Input status Green if OK,
Red if error detected
3 Audio/Video test Green if test signal is OFF,
Yellow with type indicators when test signal is
enabled:
• Color bar for color bar test signal
• Loudspeaker for audio test signal
4 ABUS Multiple
Card
Configuration
Green if OK,
Red if the detected card configuration does not
match the configuration set on the ABUS panel
2. The left portion of the window contains all the parameter groups, which become highlighted when they
are selected; the main panel (4) then displays the group’s set of parameters. Each of the groups is
described in detail below.
3. The lower section of the window contains controls to access the user presets.
4. The main panel contains all the parameters specific to the group selected. It may contain several tabs to
help manage the different parameters.
3.3.2 The Input group
Use the radio buttons in this panel to set the
input video format for this card.
The available options are different for 525 and
625 operation:
525 input options
• SMPTE
• GBR
• GBR with SETUP
• BETA
• BETA with SETUP
625 input options:
• EBU
• GBR
• Beta
Figure 3.2 Input group