Grass Valley ADC-1101 User Manual
Page 25
GUIDE TO INSTALLATION AND OPERATION
ADC-1101 | 21
• Remote System Administration – opens the Joining Locators
data box.
3.3.14 User Presets
The User Preset controls are located at the lower
left corner of the iControl panel. If they are not
visible, click the arrow icon on the left side to
reveal the buttons and presets.
Select any one of the five presets using the
pulldown list. The name of the currently-selected
User Preset is shown on the pulldown icon (e.g.
User1, User2,… User5)
• Click
Load to load the contents of the
selected User Preset into the ADC-1101.
All parameter settings and values will be
replaced by the contents of the selected
User Preset.
• Click
Save to store the current parameter
settings and values from the ADC-1101
into the selected User Preset. The existing
contents of the preset will be overwritten.
Figure 3.25 Joining Locators window
Figure 3.26 User Presets and Profiles