Grass Valley ADC-1101 User Manual
Page 15
GUIDE TO INSTALLATION AND OPERATION
ADC-1101 | 11
SUM (A+B) (see CH 2 in figure3.4)
Two sources are selected using the Source A and Source B ABUS Select and Channel pulldowns. The
two sources are added, and the level of the combined signal is attenuated by the amount selected in the
Sum (A+B) LEVEL pulldown.
• The ABUS select options are:
o
V
select one of the 16 channels from the video card.
o
A1 select one of the 16 channels from an audio card. A1 is always Local, Slave 1 or Master
o
A2 select one of the 16 channels from an audio card. A2 is always Slave2 or Slave.
• The
Sum (A+B) Level pulldown offers attenuations of 0 dB, -3 dB and -6 dB.
NOTE: If you attempt to mix two different audio types to an output, only the Source A signal will be
routed to this output and the Source A audio type will be displayed. The Source B signal will be
ignored.
Mix (see CH 3 in figure 3.5)
Two sources are selected using the Source A
and Source B ABUS Select and Channel
pulldowns. The two sources are mixed, with
the level of each source adjusted using its
slider or data entry box.
• The ABUS select options are:
o
V
select one of the 16 channels
from the video card.
o
A1 select one of the 16 channels
from an audio card. A1 is always
Local, Slave 1 or Master
o
A2 select one of the 16 channels
from an audio card. A2 is always
Slave2 or Slave.
• The contribution of each of the sources to
the mix is adjusted using its Level slider
or direct keyboard entry into the data box,
over a range from -96 to 0 dB.
NOTE: If you attempt to mix two different audio types to an output, only the Source A signal will be
routed to this output and the Source A audio type will be displayed. The Source B signal will be
ignored.
OFF (See CH 4 in figure 3.5)
The output is muted.
Figure 3.5 Audio Output group – CH 3&4 tab