Cameraman ports and jacks, Figure 1.8 ports and jacks, Cameraman ports and jacks 8 – Grass Valley 3e CameraMan User Manual
Page 16: Ports and jacks 8
Chapter 1
8 CameraMan 3e 3-CCD Camera Installation and Operations Manual
CameraMan Ports and Jacks
The back of the CameraMan 3e 3-CCD Camera has
a variety of ports and jacks used to connect the
camera to other video and camera control compo-
nents in a system.
FIGURE 1.8
Ports and Jacks
VIDEO OUT
This is a Composite Video Out signal on the left
and an SDI Video Out signal on the right.
PVI COM Jack
Used by certain Grass Valley devices as a
communication interface to the camera system.
(For example, a hard-wired keypad would attach
here). This is a standard 6-conductor RJ-11 jack.
RS-485 Jack
Used for RS-485 communications between the
camera system and other Grass Valley devices.
This jack can be used to network multiple cameras
or to connect appropriate Grass Valley approved
peripherals using a Grass Valley T-connector. This
is a standard 4-position modular handset jack.
Auxiliary
Communication Port
Provides communications to select Grass Valley
peripherals and provides capability for future
expansion.
RS-232 Port
Provides RS-232 communications to external
devices such as PC’s or other vendor control
systems. This connector is a standard DB-9
(female).
S-Video Jack
Y/C
Cable Restrainer
Helps keep cables from becoming disconnected,
or hindering the pan and tilt capabilities.
Composite Video Jack
Y/Pr/Pb