Chapter 4, Using the cameraman 3e 3-ccd camera, System startup – Grass Valley 3e CameraMan User Manual
Page 33: Figure 3.1 back of camera with power, Using the cameraman 3e 3-ccd camera 25, Back of camera with power 25, Chapter 4 using the cameraman 3e 3-ccd camera
Advertising
071839000
June 2005
25
System Startup
Once all necessary connections and configurations
are made, you are ready to turn on the system.
1.
Just switch the Power button on the back of the
CameraMan Camera to the ON position. The
Camera should automatically enter its position
calibration mode and then stop at the zero
degree point.
FIGURE 3.1
Back of Camera with Power
Chapter 4
Using the CameraMan
3e 3-CCD Camera
Advertising