Grass Valley 3e CameraMan - Manual (Page 54)

46 CameraMan 3e 3-CCD Camera Installation and Operations Manual
Appendix G
5. Verify that the POWER LED, on the front of the
camera, is illuminated. Also verify that the
12VDC indicator, on the rear of the camera
block, is illuminated. If the POWER LED is not lit.
check the POWER switch to make sure that it is
ON, then verify that the Power Supply is con-
nected to the camera properly. If the 12VDC LED
on the rear of the camera block is not illumi-
nated, verify that the I/F Remote SCSI cable is
connected properly.