Chapter 3, Configuring the cameraman 3e 3-ccd camera, Switch configuration – Grass Valley 3e CameraMan User Manual
Page 29: Figure 3.1 configuration plate, Configuring the cameraman 3e 3- ccd camera 21, Switch configuration 21, Configuration plate 21
Advertising
071839000
June 2005
21
Switch Configuration
Now that CameraMan is connected to the power
supply and control devices, the Camera must be
configured to work in the desired application. To
begin, remove the configuration plate on the back
right side of the camera by removing the two screws
holding it in place. Behind it are the configuration
switches.
FIGURE 3.1
Configuration Plate
Chapter 3
Configuring the CameraMan
3e 3-CCD Camera
Advertising