Grass Valley K2 Dyno PA Configuration Manual v.1.5 - Manual (Page 29)

The K2 system appears in the Navigator pane. While Dyno PA is in the process
of establishing a connection with the system, the icon next to the K2 system
turns yellow.
NOTE: In the SAN system, the V:\ drive is displayed in the Navigator pane
under the SAN while the individual Dyno sessions are displayed under each
K2 Summit Production Client that uses the SAN for storage. In the standalone
server, the V:\ drive and Dyno sessions are all listed under the standalone
server.
5. If you are not planning to use the Browse feature of the Dyno PA, proceed to Adding
a bin or Adding a repository, depending on your workflow.
6. If you are planning to use the Browse feature of the Dyno PA, proceed to Installing
the generic iSCSI Client software.
Related Links
Configuring the K2 Summit SAN and K2 Dyno PA on page 21
Configuring the standalone K2 Summit system and K2 Dyno PA on page 33
Managing K2 Dyno PA on page 49
Installing the generic iSCSI Client Software
To use the Browse feature on the K2 Dyno PA machine with a K2 Summit SAN, you
need to install the generic iSCSI Client software on the Dyno PA machine. The Generic
iSCSI Client software is located on the download site.
1. Navigate to the K2 Summit folder and double-click on the 727b1319_gi.exe
program.
2. Follow the instructions to install the software.
3. Once the generic iSCSI install software is installed, reboot the Dyno PA machine.
4. When the machine comes back up, go to Start | Settings | Control Panel |
Administrative Tools | Services and verify that the service Grass Valley K2 Config
is running.
5. Proceed to Configuring the iSCSI client on the K2 Dyno PA.
Related Links
Configuring the K2 Summit SAN and K2 Dyno PA on page 21
Configuring the iSCSI client on the K2 Dyno PA
To enable the Browse feature on the K2 Dyno PA application to work with a K2
Summit SAN system, the K2 Dyno PA machine must be configured as an iSCSI client.
You use the K2 Configuration application wizard to configure each of the K2 Dyno
15October 2010 K2 Dyno Production Assistant Configuration Manual version 1.5 29
Configuring the K2 Summit SAN and K2 Dyno PA