Grass Valley K2 Dyno PA Configuration Manual v.1.5 - Manual (Page 47)

K2 Summit Production Client that uses the SAN for storage. In the standalone
server, the V:\ drive and Dyno sessions are all listed under the standalone
server.
5. If you are not planning to use the Browse feature of the Dyno PA, proceed to Adding
a bin or Adding a repository, depending on your workflow.
6. If you are planning to use the Browse feature of the Dyno PA, proceed to Installing
the generic iSCSI Client software.
Related Links
Configuring the K2 Summit SAN and K2 Dyno PA on page 21
Configuring the standalone K2 Summit system and K2 Dyno PA on page 33
Managing K2 Dyno PA on page 49
Configuring SNFS for the DLC or iSCSI client on the K2 Dyno PA
Prerequisites:
• The standalone or K2 Summit SAN system must have been configured as described
in the section on configuring your K2 Summit system.
• A K2 Summit system, referred to as a server in the K2 Dyno PA application, must
have been added to the Dyno PA client.
• The K2 Dyno PA machine must have the requirements described in the K2 Dyno
PA Prerequisites.
• The K2 Dyno PA machine must have the identical FsNameServers file as the K2
Summit system. This file must be in the C:\SNFS\Config folder on the Dyno PA
machine. For more information, see About configuring K2 Summit systems and K2
Dyno PA .
To enable the Browse feature on the K2 Dyno PA application to work with a K2
Summit system, the K2 Summit system needs to be configured for K2 Dyno PA and
the SNFS software needs to be configured on the Dyno PA machine. This section
describes configuring SNFS software for the DLC or iSCSI client on the Dyno PA
machine.
1. If you do not already have the K2 Dyno PA application open, start it now.
2. Right-click on the K2 Summit system in the Navigation pane, and select Edit Server .
The Add/Edit Server Device dialog box displays.
3. In the Add/Edit Server Device dialog box, check the Enabled box.
4. Click the SNFS Configuration button.
5. Enter the file system name.
If using a standalone K2 system, the file system name must be unique to this
K2 Summit system, for example gvfs_summit1. The name is case sensitive.
15October 2010 K2 Dyno Production Assistant Configuration Manual version 1.5 47
Configuring the standalone K2 Summit system and K2 Dyno PA